Print this information

COMPLETE® Multi-Purpose Solution
Cleans, Rinses, Disinfects, Removes Protein and Stores - All Steps In One Bottle

LENS CARE DIRECTIONS

RINSE for lens-wearing comfort
When you insert your lenses
1. Wash your hands with soap and water and dry with a lint-free towel prior to handling your lenses.
2. Prior to reapplying lenses, RINSE each side of the lens for 5 seconds with fresh COMPLETE® Multi-Purpose Solution to
remove any debris on the lens. RUB, RINSE & SOAK for effective disinfection
When you remove your lenses
1. Wash your hands with soap and water and dry with a lint-free towel prior to handling your lenses.
2. Place 3 drops or more of COMPLETE® Multi-Purpose Solution on one side of the lens surface.
3. RUB your lens gently from the center to the edges for at least 10 seconds (Never rub in a circular motion, because it may
tear the lens and not clean the outer edge surface).
4. After rubbing for at least 10 seconds, turn the lens over and repeat step 3.
5. RINSE each side of the lens for 5 seconds with fresh COMPLETE® Multi-Purpose Solution. Place lenses in clean COMPLETE® lens case and fill with COMPLETE® Multi-Purpose Solution. Close COMPLETE® lens case tightly.
6. SOAK - Allow lenses to soak for a minimum of six (6) hours for disinfection, cleaning and protein removal.

EXTRA CLEANING AND COMFORT

Based on your unique tear chemistry and lens replacement schedule, your doctor may recommend additional care procedures. This may be particularly important if lenses are kept longer than 90 days. Always rinse your lens case with COMPLETE® Multi-Purpose Solution and allow to dry.

LENS STORAGE

You may leave your lenses in the unopened COMPLETE® lens case containing COMPLETE® Multi-Purpose Solution for up to 30 days. Your lenses must be cleaned and disinfected with fresh solution every 30 days and prior to lens wear.

PROTEIN REMOVAL FROM YOUR CONTACT LENSES

COMPLETE® Multi-Purpose Solution removes protein while your lenses are soaking in the COMPLETE® lens case. Daily use of COMPLETE® Multi-Purpose Solution eliminates the need for a separate enzymatic cleaner for many lens wearers - consult your eye care practitioner.

DESCRIPTION

COMPLETE® Multi-Purpose Solution is a sterile, isotonic, buffered solution, preserved with polyhexamethylene biguanide
(0.0001%), a phosphate buffer, Poloxamer 237, edetate disodium, sodium chloride, potassium chloride, and purified
water. COMPLETE® Multi-Purpose Solution contains no chlorhexidine or thimerosal.

ACTIONS

COMPLETE® Multi-Purpose Solution has been formulated for multi-purpose use with soft (hydrophilic) contact lenses. This
solution cleans, loosens and removes accumulations of film, protein, other deposits and debris from soft (hydrophilic) contact
lenses. It destroys harmful microorganisms on the surface of the lenses, and also rinses and stores the lenses.

INDICATIONS (Uses)

COMPLETE® Multi-Purpose Solution is indicated for the care of soft (hydrophilic) contact lenses. Use this product, as
recommended by your eye care practitioner, to:

CONTRAINDICATIONS (Reasons not to use)

Do not use if you are allergic to any ingredient in this product.

WARNINGS

PROBLEMS WITH CONTACT LENSES AND LENS CARE PRODUCTS COULD RESULT IN SERIOUS INJURY TO THE EYE. It is essential that you follow your eye care practitioner’s directions and all labeling instructions for proper use and care of your lenses and lens care products, including the lens case. EYE PROBLEMS, INCLUDING CORNEAL ULCERS, CAN DEVELOP RAPIDLY AND LEAD TO LOSS OF VISION. Daily wear lenses are not indicated for overnight wear and should not be worn while sleeping. Clinical studies have shown that the risk of serious adverse reactions is increased when these lenses are worn overnight. Extended wear lenses should be regularly removed for cleaning and disinfection or for disposal and replacement on the schedule provided by your eye care practitioner. Clinical studies have shown that there is an increased incidence of serious adverse reactions in extended wear contact lens users as compared to daily wear contact lens users. Studies have also shown that the risk for serious adverse reactions increases the longer extended wear lenses are worn before removal for cleaning and disinfection or for disposal and replacement. Studies have also shown that smokers had a higher incidence of adverse reactions. It is recommended that contact lens wearers see their eye care practitioner once each year or, if directed, more frequently. To avoid contamination, do not touch the tip of the COMPLETE® Multi-Purpose Solution bottle to any surface. Replace cap after using.

PRECAUTIONS

ADVERSE REACTIONS (Problems and what to do)

The following problems may occur: eyes sting, burn or itch (irritation); comfort is less than when lens was first placed on the eye; feeling of something in the eye (foreign body, scratched area); excessive watering (tearing) of the eye; unusual eye secretions; redness of the eye; reduced sharpness of vision (poor visual acuity); blurred vision; rainbows or halos around objects; sensitivity to light (photophobia); or dry eyes. If you notice any of the above:

IMMEDIATELY REMOVE YOUR LENSES

GOOD LENS CARE PRACTICES

HOW SUPPLIED

COMPLETE® Multi-Purpose Solution is supplied sterile in 2 fl. oz. (59 ml), 4 fl. oz. (118 ml), 12 fl. oz. (355 ml) and 16 fl. oz. (473 ml) plastic bottles. The bottles are marked with lot number and expiration date.